Built-in cylindrical drip irrigation pipe equipment is currently commonly used water-saving irrigation equipment. It is composed of PE pipes and cylindrical drippers set at intervals on the inner wall of the PE pipe. The water outlet position of the cylindrical dripper is drilled through the surface through the punching system to produce water. Phenomenon of cylindrical drip irrigation pipes to achieve the purpose of water conservation.

This kind of internal cylindrical drip irrigation pipe equipment consists of: screening machine, feeding machine, main machine, conveying rod device, conveying device, sizing box, cooling tank, tractor, punching machine, winding machine, control cabinet, etc. composition.

Technical knowledge of the conveying device:

After the dripper is selected by the screening machine, it enters the synchronous belt, is rotated by the speed regulating motor, and is conveyed to the position of the transition plate by the synchronous belt. It passes smoothly through the semicircular groove R18 of the transition plate, and then the servo motor rotates directly into the conveying pipe.

The tightness of the dripper is adjusted by adjusting the adjusting nut to adjust the adjusting plate and the synchronous wheel clamp to make the dripper pass smoothly in the conveying pipe.

The amount of dripper is achieved by adjusting the motor and the speed of the servo motor. The more the amount, the higher the speed of the motor and the regulating servo motor.

When the problem of the dripper is unstable, it can be solved by adjusting the elastic force of the shrapnel, that is, the size of the resistance of the dripper in the conveying pipe.