Micro-sprinkler tape is a new type of micro-irrigation equipment in agricultural production. During the working process, water is sent to the field through the water pipe and micro-sprinkler tape under pressure. Through the water outlet on the micro-sprinkler tape, under the action of gravity and air resistance, the drizzle-like spraying effect we see is formed. It is commonly used in field crop planting, and therefore often forms a special landscape.

Precautions:

Although micro-sprinkler tape is more resistant to clogging than drip irrigation tape, micro-sprinkler tape is also prone to clogging, so it is necessary to clean the micro-sprinkler tape regularly. When the micro-sprinkler tape is not in use, the water in the micro-sprinkler tape must be drained and stored in a dry and cool place after rolling up to avoid sun exposure and reduce the service life of the micro-sprinkler tape.

Method/Steps

1. The water holes of the micro-sprinkler belt are mostly arranged in multiple and empty groups according to a certain distance and certain rules, such as: oblique five holes, oblique three-way, horizontal three holes, left and right holes and no holes, etc. The water holes are generally mechanically drilled, started and laser punched, with a hole diameter of 0.1~1.2mm, and the empty shape is circular. The main models of micro-sprinkler belts are: N30, N45, N50, N65, four specifications, which can be used for irrigation of vegetables, mushrooms, nurseries, orchards, flowers, and greenhouse crops.

2. After carefully selecting and purchasing micro-sprinkler belts, in order to give full play to its functions, it is very important to master the correct laying and use methods. When laying micro-sprinkler belts, it is necessary to avoid damage caused by friction between the equipment and hard objects. It should be noted that the spray holes of the micro-sprinkler belt should face upwards. It is wrong to lay the nozzle downwards. The nozzle downwards will not only cause deep leakage of irrigation water, but also soil erosion, and in severe cases, plant root rot. When the nozzle is found to be flipped during irrigation, the nozzle should be adjusted in time.

3. After laying, the micro-sprinkler belt and the water pump interface should be fixed tightly. Although the water supply pressure of micro-sprinkler irrigation is lower than that of sprinkler irrigation, there is still a certain pressure overall. If the interface is loose, the micro-sprinkler belt will easily fall off, affecting the irrigation efficiency. After the water pump starts to supply water, the gate valve should be adjusted according to the width between several micro-sprinkler belts, from small to large, to the appropriate width to ensure uniform irrigation.