Shandong Hengxiang Plastic Machinery Co., Ltd. analyzes the uses of labyrinth drip irrigation tape for everyone:

Single wing: This equipment is used for non-reusable drip irrigation tape with drip holes on one side and a labyrinth-shaped flow channel, which is made of PE raw materials and recycled materials as the main raw materials, and is formed by extrusion blow molding and vacuum mold.

Labyrinth drip irrigation tape is widely used for irrigation of crops such as fields, greenhouses, fruit trees, flowers, vegetables, cotton, corn, wheat, etc. It is a water-saving and energy-saving equipment that increases production and income.

Multi-layer: Two extruders co-extrude in-mold compounding to improve the bonding strength and pump pressure capacity of the drip irrigation tape, and avoid the occurrence of pipe bursting and cracking.

However, the labyrinth drip irrigation tape has inherent deficiencies. Compared with the embedded patch drip irrigation tape, it has the following characteristics:

1. The embedded dripper has its own filter window and good anti-blocking performance.

2. Turbulent flow channel design. Watering is uniform.

3. The dripper and pipeline have good integrity,

4. The dripper spacing is flexibly adjusted and has a wide range of applications

Shandong Hengxiang Plastic Machinery Co., Ltd. In order to let everyone know that drip irrigation tape uses plastic pipes (drip irrigation pipes [3]) to deliver water to the roots of crops through the holes or drippers on the capillary tubes with a diameter of about 10 mm for local irrigation. It is through the drippers or drip irrigation tapes with very small outflow holes that water is dripped evenly and slowly into the soil near the roots of crops.

The role of drip irrigation tape:

It is currently a water-saving irrigation method in arid and water-scarce areas, and its water utilization rate can reach 95%. Drip irrigation has a higher water-saving and yield-increasing effect than sprinkler irrigation. At the same time, it can be combined with fertilization to increase fertilizer efficiency by more than double. It can be used for irrigation of fruit trees, vegetables, cash crops and greenhouses, and can also be used for irrigation of field crops in arid and water-scarce areas. Its disadvantage is that the drippers are prone to scaling and clogging, so the water source should be strictly filtered. At present, domestic equipment has basically passed the test, and areas with conditions should develop drip irrigation as soon as possible. With the development of science and technology and the popularization of the national policy of promoting agriculture through science and technology, some farmlands in arid areas such as Northwest China and North China have adopted water-saving irrigation technology, but some farmlands still use traditional irrigation methods. Traditional irrigation methods are labor-intensive and time-consuming, and the amount of irrigation water and the effective utilization rate are somewhat different from those of water-saving irrigation. Water-saving irrigation not only saves time and effort, but also indirectly brings considerable economic benefits to farmers, while the disadvantages of traditional irrigation in this regard are more obvious.