Patterned hose equipment

Classification:Patterned hose
Number of visits:times
Date of Issue:2024-06-17 16:24:50

I want to make an inquiry

Product overview
The performance characteristics of
Technical parameters

Features of double-layer down-blowing patterned hose production equipment:

1. Two extruders of the same model are used to extrude together in the same double-layer spiral die head, and different raw materials are used, which can ultimately improve the tensile strength of the product.

2. A water-immersed vacuum sizing forming device is used to produce ordinary hoses; or an oil film temperature machine is used to control the die and adjust the temperature; an induction probe is used to control the blowing ratio to produce new patterned hoses.

3. Traction adopts a crawler traction device and variable frequency speed regulation to ensure the flatness of the hose and the stability of production.

4. The winding adopts a double-station * tension control winding. Depending on the different diameters of the product pipes, vertical or parallel winding methods can be used.

5. The entire set of equipment uses an intelligent temperature control device to control each process, with a high degree of automation and easy operation.

Use:

This product is widely used in greenhouses, gardens, and irrigation of cash crops in farmland.

花纹水带设备

Equipment features: The double-layer composite bottom-blowing patterned soft belt unit adopts a double-machine bottom-blowing method, vacuum sizing and water immersion cooling molding, the die head adopts a double-layer composite, the die is controlled by an oil film temperature machine, the temperature is adjusted, and the product blowing ratio is controlled by an induction probe. It has high sensitivity, stable production, and fast line speed.

Product performance:

1. The pressure and burst strength of the double-layer composite bottom-blowing patterned soft belt unit are 60% higher than the general water belt strength, and the tension is good.

2. The traction machine uses a variable frequency speed regulating motor, chain transmission, speed adjustment, and stability.

3. The winding machine adopts a double-station * tension control winding.

4. The electrical appliance adopts intelligent digital display temperature control.

Technical parameters:

Extruder Model	SJ-55*2	SJ-50*2
Screw diameter/length ratio	Φ55/30:1	Φ50/30:1
Driving motor power (kw)	22*2	18.5*2
Die head specifications (mm)	Φ110, Φ120, Φ145, Φ150, Φ180, Φ220
cooling method	水冷
Sizing sleeve	(Φ110-Φ220)
Vacuum pump specifications (kw)	2.2	1.5
Traction motor(kw)	2.2	1.5
Rolling form	Double station winding
Production line design speed	20-100m/min